How to Install UHMWPE Crane Outrigger Pads on Jobsite

Overview

This guide covers the practical steps to install uhmwpe crane outrigger pads on jobsite. JSLT GroundMat produces engineering plastic components in UHMWPE, HDPE, PA, POM and PTFE — full-process fabrication from raw sheet to CNC-machined parts.

Step-by-step procedure

1. Inspect ground. Remove debris; ground should be visibly flat and stable.
2. Place pad centered under outrigger. Outrigger float must contact pad center within 100mm.
3. Lower outrigger gradually. Watch for pad tilt; halt if soil yields beyond 25mm.
4. Check level after load. Verify crane level post-stabilization.
5. Document inspection. Photograph setup and ground condition for safety records.

Need help?

Our engineering team reviews drawings within 24 hours. We have shipped to 80+ countries across 4 continents and hold ISO 9001 certification.